Scanning
63
6
Each page is saved as a separate file.
For iPad 6
a Load your document on to your machine.
b Tap the Brother iPrint&Scan icon on the Home screen.
If the screen for another function is displayed, switch to the scan function by tapping Scan.
c Tap Settings.
The Scan Settings screen appears.
d Make sure your machine is selected.
Do one of the following:
If your machine is selected, go to step f.
If a different machine is selected or if Device Is Not Selected is displayed, make sure your machine
is turned on and then tap the displayed scanner name or Device Is Not Selected. Go to step e.
e The application will search your network and display a list of available machines. Tap your machine in
the list.
Tap Scan Settings.
f Do one of the following:
To change other scan settings, see Scan Settings on page 78. After changing the settings, go to
step g.
If you do not want to change any other settings, tap outside of the Scan Settings screen to close the
screen, and then go to step g.
To Next Page
Loading...
Need help?
General