Brother RJ-3050 - Page 47

Setting Up the Printer
38
1
d Use [ ] or [ ] to specify two digits each for the hour and minutes, and then select [AM], [PM] or [24].
e Press the [OK] button. The main screen appears, and the specified time and date are displayed.
Note
The format for the time and date can be changed. Select [Administration], and then select [Date
Format] or [Time Format] to specify the setting. (The default password is "1111".)
Setting the Menu Security 1
When setting the menu security, access to the Administration mode can be restricted by setting a password.
a Press the [Menu], [ ], or [ ] button to select the [Administration] menu, and then press the [OK]
button. (The default password is "1111".)
b Select [Menu Security] > [Menu Security (On/Off)] > [On] using [ ] or [ ], and then press the
[OK] button.
To set the password, select the [Administration] menu > [Menu Security] > [Set Password] using
[ ] or [ ], and then press the [OK] button. Specify the first number using [ ] or [ ], and then press the [OK]
button to proceed to the next number. Specify the remaining three numbers in the same way.
Note
• After a password has been set, the password input screen appears when the [Administration] menu
is selected. Enter in the specified 4-digit password using [ ] or [ ], and then press the [OK] button.
• To cancel the password settings, select the [Administration] menu and enter the password. Then,
select [Menu Security] > [Menu Security (On/Off)] > [Off].
• If you do not remember the password, use [Device settings] in the “Printer Setting Tool” to return all
settings to their factory defaults or specify the password again and apply it. For details, see Device Settings
on page 66.