Brother RJ-3050 - Page 80

Printer Setting Tool
71
3
6 Print Speed
Select the printer’s printing speed.
Available settings: [2 ips / 50.8 mm/s], [3 ips / 76.2 mm/s], [4 ips / 101.6 mm/s], [5 ips / 127 mm/s]
7 Print Density
Adjust the printer’s printing density.
Available settings: -5–+5
8 Align Paper Leading Edge when the Cover is Closed
Select whether or not the paper is automatically fed when the cover is closed.
Available settings: [Feed], [Do not Feed]
9 Printing Reference Point Adjustment
Adjust the position of the reference point (point of origin for printing). This corrects printing misalignments
resulting from differences in printer models or from the fixed margins of some applications.
The reference point cannot be adjusted for raster printing.
10 Tear Adjust
Adjust the tear bar tear off position for paper media.
Available settings: -10.0 to 10.0 mm