To Next PageTo Next Page
Need help?Do you have a question about the Brother S-1000A-5 and is the answer not in the manual?
General| Brand | Brother |
|---|---|
| Model | S-1000A-5 |
| Category | Sewing Machine |
| Language | English |
Explains safety indications used in the manual and on the machine for safe operation.
Details the meaning of various safety symbols, including caution and mandatory actions.
Specifies environmental conditions such as temperature, humidity, and power supply for safe machine use.
Provides crucial safety guidelines for installing the sewing machine and its components.
Covers safety measures during sewing, including protective gear and handling moving parts.
Outlines safety procedures and precautions to be taken during machine cleaning.
Details safety requirements for performing maintenance and inspection on the sewing machine.
Identifies and explains various warning labels found on the machine, emphasizing their importance.
Recommends ideal locations for setting up the sewing machine, avoiding electronic interference.
Provides instructions on how to safely carry the sewing machine using two people.
Explains the correct method for tilting and returning the machine head to prevent injury.
Details the specifications and drilling layout for the machine table during installation.
Guides on selecting and installing the appropriate motor and V-belt for optimal performance.
Step-by-step instructions for installing the main sewing machine head and related components.
Details on installing and adjusting the knee lifter plate for ergonomic operation.
Instructions for installing the V-belt and adjusting its tension correctly.
Guide on how to install the bobbin winder mechanism properly.
Instructions for attaching the belt covers to protect moving parts and ensure safety.
Explains the correct procedure for connecting ground wires for electrical safety.
Steps for securely installing the cotton stand for the sewing machine.
Details on how to lubricate the sewing machine, including oil type and level checks.
Procedure to verify the correct rotating direction of the machine pulley for proper operation.
