Brother S-7200B User Manual (English)

Other manuals for Brother S-7200B

Service Manual84 pages

Manual De Instrucciones74 pages

Parts List2 pages

Specifications6 pages

Parts Manual84 pages

Questions and Answers:

S
Sherry VelasquezAug 25, 2025
How to fix skipped stitches on Brother S-7200B?
- L
  leetiffanyAug 25, 2025
  To prevent skipped stitches while sewing with your Brother Sewing Machine, ensure the needle isn't bent or broken, and replace it if necessary. Verify the needle is correctly installed and the machine is properly threaded. Adjust the presser foot pressure, and if the needle is too thin, replace it with a slightly thicker one. Also, check the height of the presser foot and the tension of the thread take-up spring. Finally, ensure the needle and rotary hook timing are correct by adjusting the needle bar height and the clearance between the needle and the rotary hook tip.
L
lindsey85Aug 30, 2025
What to do if the lower thread is tangled at the sewing start on my Brother S-7200B?
- R
  Rebecca JordanAug 30, 2025
  If the lower thread is tangling when you start sewing: * Ensure the bobbin spins in the correct direction, opposite to the rotary hook, when the lower thread is pulled. * Make sure the bobbin isn't overfilled; it should be no more than 80% full. * Verify that the anti-spin spring is attached. * If the bobbin isn't turning smoothly, replace it. * Only use bobbins specified by Brother.
K
Kathy CampbellAug 31, 2025
What to do if the oil gauge is not visible in the oil gauge window of my Brother S-7200B?
- M
  Matthew StricklandAug 31, 2025
  If the oil gauge is not visible, the oil tank may be empty. Fill the oil tank with oil.
R
Rachael SmithAug 31, 2025
What to do if my Brother Sewing Machine stops during sewing?
- M
  merrittkellyAug 31, 2025
  If the machine stops during sewing, check if the fixed stitch key is turned on. If so, press the fixed stitch key so that the indicator turns off. Also, the power supply voltage may be too low; check the power supply.
M
Maria FerrellSep 1, 2025
What to do if my Brother Sewing Machine does not operate when power is on and the treadle is pressed?
- C
  Christina CarrSep 1, 2025
  If the machine does not operate when the power is on and the treadle is pressed, the power supply connector may be disconnected from the control box. Insert the connector securely.
M
Mr. Jacob EvansSep 1, 2025
Why is the seam uneven on my Brother S-7200B Sewing Machine?
- S
  Sonya JohnsonSep 1, 2025
  To fix uneven seams on your Brother Sewing Machine, adjust the presser foot pressure if it's too weak. Also, adjust the feed dog height if it's too low. If the bobbin is scratched, smooth it with an oiled grindstone or replace it.
J
John SchultzSep 2, 2025
How to reduce puckering on Brother S-7200B?
- R
  Robert CastanedaSep 2, 2025
  If you're experiencing a large degree of puckering with your Brother Sewing Machine, weaken the upper and lower thread tension as much as possible. Replace the needle if it's blunt, and use as thin a needle as possible. Reduce the thread take-up spring tensions and lower its position. Adjust the presser foot pressure if it's too strong. Reduce the sewing speed gradually, and tilt the front of the feed dog down slightly to correct its angle.
A
Ashley RosalesSep 2, 2025
What causes material slippage on Brother Sewing Machine?
- J
  Justin MortonSep 2, 2025
  If you're experiencing material slippage with your Brother Sewing Machine, adjust the presser foot pressure.
K
Katherine GutierrezSep 3, 2025
Why are there loops in the seam of my Brother S-7200B?
- A
  Andrew HortonSep 3, 2025
  If loops appear in the seam of your Brother Sewing Machine, polish the thread path with a fine-grain file or sandpaper if it's not smooth enough. If the bobbin isn't turning smoothly, check for slackness in the thread tension, or replace the bobbin or bobbin case.
R
Regina WalshSep 3, 2025
What to do if Brother Sewing Machine is not trimming thread?
- D
  David WelchSep 3, 2025
  To resolve incorrect thread trimming where the upper or lower thread is not being trimmed on your Brother Sewing Machine, ensure the needle is correctly installed. If the fixed knife or movable knife is blunt, replace it.

Brother S-7200B Specifications

General

Type	Industrial Sewing Machine
Model	S-7200B
Stitch Type	Lockstitch
Max Stitch Length	5 mm
Needle Type	DB x 1
Lubrication	Automatic
Motor Type	Direct Drive
Sewing Speed	5000 rpm