What to do if the Brother SDX325 Cutter scanned image is red?
If the scanned image from your Brother Cutter appears red, and you're using an optional scanning mat, it's likely because the blue tape hasn't been removed. Peel off the blue tape before scanning.
What to do if the Brother SDX325 Cutter mat cannot be fed?
If the Brother Cutter mat won't feed, check for obstructions around the slot at the back of the machine and make sure the machine is placed on a flat, even surface. Keep the area around the slot clear so the mat can feed through properly.
Why does the Brother Cutter machine cannot be turned on?
If your Brother Cutter machine won't turn on, ensure the AC power cord is correctly connected to the electrical outlet.
What to do if the Brother SDX325 Cutter transferred data cannot be retrieved?
If you can't retrieve transferred data on your Brother Cutter, it might be because the storage period on the server has elapsed, or the cutting machine wasn't registered on CanvasWorkspace when the data was transferred. Retrieve the data soon after transferring it. Register the cutting machine with CanvasWorkspace and transfer the data again.
What to do if the Brother SDX325 mat is inserted, the attached material peels off?
If the material peels off when inserting the mat into your Brother Cutter, it could be because the mat isn't level due to the material's weight or the mat's adhesive has weakened. Hold the mat level while inserting it, or replace the mat with a new one.
Highlights safety precautions and symbols used in the document.
Details various machine settings including language, units, cut area, speed, and pressure.
Details pattern editing functions like sizing, duplicating, rotating, welding, and grouping patterns.
Explains how to use pens and pen holders to draw patterns and outlines on materials.
Scan illustrations or drawings directly for cutting without creating separate data.
Scan illustrations and convert them into cutting data that can be saved.
Guides through enabling and setting up the machine's wireless network connection.
Step-by-step instructions for connecting the machine to a wireless network using the setup wizard.
Offers solutions for common problems with machine operation, cutting, scanning, and data transfer.
To Next Page
General
