What to do if material peels off when Brother Cutter mat is inserted?
When inserting the Brother Cutter mat, hold it level with your hands to counteract the weight of the material. If the issue continues, the mat’s adhesive strength may have decreased, so replace the mat with a new one.
Why Brother SDX900 cannot be turned on?
Check that the power cord is connected to the electrical outlet.
General| Model | SDX900 |
|---|---|
| Built-in Designs | 682 |
| Wireless Connectivity | Yes |
| Auto Blade Technology | Yes |
| Connectivity | USB |
| Blade Adjustment | Automatic |
| Display | LCD |
| Scanning Capability | 600 DPI |
| Software Compatibility | CanvasWorkspace |
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | 3.6 kg |
Details essential safety warnings, including symbols for fatal or serious injuries.
Describes the various parts and components of the cutting machine and their locations.
Covers initial setup steps like removing packing materials and powering on the machine.
Explains how to configure machine settings such as language, units, and auto shutdown.
Guides through initial operations like selecting mats, attaching materials, and performing test cuts.
Details procedures for cutting built-in patterns, including tutorials for basic and advanced patterns.
Explains how to select single or multiple patterns for cutting or editing.
To Next Page
