Using the Optional Touchpanel Display (Optional:PA-TDU-001) (TD-2125N/2135N/2125NWB/
65
10
Information About Replacing
the Touchpanel 10
a The TDU panel cover is attached with
four tabs. While pressing the two tabs
(1) at the front, slide the cover up and
unhook the tabs. Then, press the two
tabs (2) at the back to unhook the tabs
in the same way.
b Remove the TDU panel cover, and
place the touchpanel (1) to be used,
then the clear protective sheet (2) on the
touchpanel holder (3).
c Install the TDU panel cover in its original
position.
1
2
Since foreign material, such as dust,
caught between the touchpanel,
protective sheet and touchpanel holder
may cause a malfunction. Make sure
that no foreign material is attached.
When the touchpanel is replaced, the
setting for the touchpanel display must
be changed. For more information, see
Selecting the Touchpanel on page 76.
To Next Page
Loading...
