Brother XR-65T User Manual

80
MAINTENANCE
ENTRETIEN
MANTENIMIENTO
NoPage 8
Foot controller is not
used correctly.
MACHINE IS
NOISY OR SLOW
MACHINE DOES
NOT START
CONTACT YOUR LOCAL SERVICE CENTER
FABRIC DOES
NOT FEED
PROPERLY
No
Page 21
Stitch Length Dial is
set at no feeding.
("0")
No
Page 77
No
Page 5
Lint is clinging to the
bottom of the needle
plate.
Power supply plug is
removed from outlet.
NoPage 39
The combination of
needle size/thread
size/fabric is
incorrect.
NoPage 7
Main power switch
is turned off.
NoPage 9
Inferior needle is
used.
NoPage 27
The bobbin winder
shaft is slid to the
right.
NoPage 31
Thread is tangled.
NoPage 55
The buttonhole lever
is pushed toward
the back of the
machine.
NEEDLE
BREAKS
No
Page 9
Needle is not
correctly inserted.
NoPage 9
Inferior needle is
used.
NoPage 39
The combination of
needle size/thread
size/fabric is
incorrect.
No
Fabric is pulled
excessively. Let the
feed dogs move the
fabric. Do not pull
the fabric.

Brother XR-65T Specifications

General

Brand	Brother
Model	XR-65T
Category	Sewing Machine
Language	English