26
iNR Functions
iNR OverRide
With the engine OFF, the reverse gate could be activated by enabling the
iNR OverRide function.
In this condition, the reverse gate will be moving at 40% of the normal oper-
ating speed.
This function is mainly used for maintenance purposes..
The iNR OverRide can be disabled bu holding the Mode button or by start-
ing the engine.
iNR Neutral Adjustment
With the engine running in idle condition, the lateral movement of the boat
could be adjusted using the Neutral Adjustment function.
Adjustments can be made using the Up/Down Button. This will provide an ad-
justable window of +15 (must forward neutral thrust) to -15 (most reverse
neutral thrust).
The iNR Neutral Adjustment will be disabled by pressing the Set Button or moving the throttle
control arm.
NOTE: The last stored Neutral Adjustment will be kept in memory and used as the default val-
ue on the next driving cycle.
+15 to -15
To Next Page
Loading...
Need help?
General
