16
4. Use UP / DOWN switch to adjust the clock. Only the hour indication and
be changed.
5. Press MODE or SET button to save the clock setting and return to the main
display.
Changing Numerical Display Indication
To change the indication in the numerical display, press the MODE button
repeatedly until DISPLAY is visible in the multifunction display. Press SET to
select the Display menu.
Move the Up / Down switch until the preferred indication is visible in the mul-
tifunction display.
Press the SET button to select and save the preferred indication, or wait for
the display function to time out. The last indication visible will be automatical-
ly saved. The numerical display will then switch to the new indication with a
small abbreviation of the indication type to its right:
FT or M °F or °C
RPM Gal/h or L/h
MPH or km/h AM or PM
4
11
-
7
Display Menu Sequence:
• Depth (when available)
• RPM
• Speed
• Engine Temperature
• Instant Fuel Flow
• Average Fuel Flow
• Clock
To Next Page
Loading...
Need help?
General
