Bruce BR3000-330-2CL - Warnings, Cautions, and Notes; Warning; Caution; Note

BR3000-330-2CL,-3CL,-2EN CMM and IPL
Document No. 33-21-57, Rev. A
Page 2
1.3 Warnings, Cautions, and Notes
1.3.1 WARNING
Warning notices are used to identify materials, processes, methods, procedures, or
limits which must be followed precisely in order to avoid injury to, or death of personnel.
1.3.2 CAUTION
Caution notices are used to identify materials, processes, methods, procedures, or
limits which must be followed precisely in order to avoid damage to the aircraft or
equipment.
1.3.3 Note
Notes are used to identify beneficial optional methods or used to provide supplemental
information.
1.4 General Safety Precautions
The following general safety precautions must be observed during all phases of
operation, service, and repair of the BR3000-330-2CL, -3CL, & -2EN Mood Lighting
systems:
1.4.1 Electrostatic Discharge
The integrated circuits (ICs) and other semiconductor devices employed in the BR3000
MLS are susceptible to damage via electrostatic discharge (ESD). Careless handling
during repair can either damage or dramatically reduce the Mean Time Between Failure
(MTBF) of the unit.
1.4.2 Modification of Equipment
Never attempt unapproved modification of the BR3000 MLS. Unauthorized modification
of the BR3000 MLS can result in unsafe conditions that could cause harm to both
equipment and personnel. Furthermore, never attempt substitution of any component
within the BR3000 MLS with non-approved substitute components or materials.