5.3.1. Graphics Printer Type 2318/ZI0054
The Graphics Printer Type 2318/ZI 0054 is ideally suited
for
recording data digitally.
Connection with the modified Indoor Climate Analyzer Type 1213/WH
1791
is made be-
tween the
BrOel
& Kjrer-SI socket on the back panel
of
the modified analyzer and the
BrOel
& Kjrer-SI socket on the
front
panel
of
the Serial Interface Module Zl 0054. A suit-
able cable
for
the connection is the AO 0299 (available). See Fig. 5.8.
Fig. 5.8. Connection between cable
AO
0299
and
the BrOel& Kjcer-SI
socket
on the
back
panel
of
the
modified
analyzer
For further information consult the Systems Engineered Instruments Instruction Manual
"Indoor
Climate Analyzer with Parallel and Serial Interface Type 1213/WH
1791
".
5.3.2. Alphanumeric Printer Type 2312
The
Alphanumeric Printer Type 2312 is ideally suited
for
recording data digitally.
Con-
nection with the modified Indoor Climate Analyzer Type 1213/WH
1791
is made between
the
IEEE socket on the back panel
of
the modified analyzer and the Interface bus on the
back
panel
of
the Alphanumeric Printer Type 2312. A suitable cable
for
the connection is
the
AO 0264 (available).
51
To Next Page
Loading...
