BRUEL & KJAER 2245 - About the Mobile App; About the PC App

8
weighting (A) and time weightings(F, S or I).
The instrument takes single measurements. In other words, the instrument calculates a single value for each measured
parameter for the total measurement time.
Standards
Go to: Menu > About > Standards
Here you will see the complete list of standards to which the instrument conforms.
About the Mobile App
The mobile app interfaces with the instrument, making remote measurements possible and making it easier to change
settings and interact with the data. It is recommended that you use the mobile app whenever possible.
Functionality of the mobile version of Noise Partner:
l Set up the instrument for measuring
l Control the instrument remotely
l Annotate measurements (add photos, videos, notes and commentary)
l Track position and time using GPS
l See the status of the instrument
l View:
l Instantaneous broadband parameters
l Total broadband parameters
l Recall past data stored on the instrument
✐ Note: If you have additional licences installed (and enabled) on your instrument, Noise Partner is able to reflect cer-
tain functionality of the other licences. However, the help for Noise Partner only includes information for licence BZ-
7300 (Noise Partner).
About the PC App
Functionality of the PC version of Noise Partner:
l Create projects from measurements stored on the instrument
l Add measurements stored on the instrument to an existing project
l View:
l Broadband levels
l Annotations (photos, videos, notes and commentaries)
l Export projects for sharing or reporting
Introduction: About