102 Icon System Manual T02985_02_03
Appendix
Figure 6.1: Mouse load phantom. Trap the air bubble at the top position of the phantom.83
Figure 6.2: Phantom holder for the rat load phantom on the rat body animal bed. ........... 84
Figure 6.3: Placement of the mouse load phantom on the mouse body animal bed. The
cap (1) of the phantom rests in the deepening (2) at the end of the animal
bed. No phantom holder is needed. ........................................................... 85
Figure 6.4: Placement of the rat load phantom in the rat body animal bed. First, the
phantom holder (1) is placed in the rat body animal bed. The fins (2) of the
phantom holder engage in the deepening of the animal bed. The phantom
cap (3) rests in the deepening of the phantom holder. .............................. 85
Figure 6.5: Final phantom setup for the mouse body animal bed. .................................... 86
Figure 7.1: MR compatible small animal monitoring and gating system (option) .............. 89
To Next Page
Loading...
