S1 TI
TAN, T
RACER
5, and CTX
User Manual
030.0112.04.0
32 of 67
If the ana
lyzer is damaged, even if it remains operational, immediately
–
1. Remo
ve the battery pack and disconnect all power sources.
2. Notify Bruker at +1 (509) 783-9850, or support.hmp@bruker.com.
If the ana
lyzer is lost or stolen, immediately notify
–
1. The appr
opriate regulatory agency in the state or country in which the device was located.
2. Local law enforcement authorities.
3. Bruker at +1 (509) 783-9850, or support.hmp@bruker.com.
Never
remove labels from the analyzer.
This v
oids regulatory approval of the instrument.
If you have questions, check with your radiation safety officer or a Bruker radiation safety officer
at +1
(509) 783-9850, or support.hmp@bruker.com.
Your Complete Source for
Testing Equipment
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
Info@BergEng.com
To Next Page
Loading...
Need help?
General
