Bruker S1 TITAN - Averaging Measurements

S1 TITAN, T
RACER
5, and CTX User Manual
030.0
112.04.0
58 of 67
11.2. Averaging
Averagin
g
Values fr
om selected measurements can be averaged.
Assays
can be selected individually or by
defau
lt.
Note: Only assays taken with the same method can be averaged.
Average
results
Average
results are
–
 Calcul
ated for elements and +/- values. If an element is missing from one of the averaged
results, the value is 0. For example, results of three assays are averaged. Al is detected at
60%, 60%, and 0%. The average is 40%.
 Analyzed for Grade Matching and Pass/Fail.
 Saved in the results list and in Results.csv.
Enabl
e
averagin
g
When Ena
ble Averaging
is checked for an a
ssay
–
 Averagin
g is available to all assays stored in the Results.csv file.
 The Use in Average and Calculate Average options are displayed on the Results screen.
 The ability to average remains in effect until Enable Averaging is unchecked.
Screen
options when
Enable Averaging is
unchecked
Screen
options when
Enable Averaging is
checked
To enable
To enable
assay
s to be
included in an average calculation
–
Step
Act
ion
Result
1
If a Result
s screen does not display
Use
in Average, tap Averaging.
The Averag
ing
screen is d
isplayed.
2
Tap the Ena
ble Averaging
checkb
ox.
A check
mark is displayed.
3
Tap OK.
The Resu
lts screen is displayed and any
assay stored on the instrument can be used
in an average calculation.
Your Complete Source for
Testing Equipment
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
Info@BergEng.com