Bruker S1 TITAN - 10 Edit Info Button

S1 TITAN, T
RACER
5, and CTX User Manual
030.0
112.04.0
52 of 67
10. Edit I
nfo Button
Descripti
on
Before a
measurement is taken
, an as
say can be named and described. This information is saved
to the Results.csv file and the <index>-<Application>.pdz (e.g., 00456-Alloys.pdz) spectrum file.
Sample I
D
Whate
ver is entered in the first field under
Va
lue
is w
hat is displayed in the
Sa
mple
ID field
in
Results (
and the Name field in Report Generator in Bruker Instrument Tools). If Operator is the
first value, then the second value is used for Sample ID.
File List
Mor
e than one source file may be available with different or additional
Field
Names
.
To acces
s additional source files, tap the downward pointing arrow to the right of the File List
field. A dropdown list is displayed. Tap a selection.
Labeling an
assay
To label sub
sequent
assays –
Step
Action
Result
1
From the Ready to Test screen,
tap the Ed
it Info button.
The Sample ID Fields screen is displayed.
2
Doub
le tap a field under
Va
lue
.*
A keyboard is
displayed.
3
Enter appropriate information.
The field reflects the change.
4
Tap OK.
The keyboard is removed and information is saved
in the field
.
5
Repeat
steps 2
- 4 as nec
essary.
6
To save changes to the Sample ID
Fields
screen, tap OK.
The Ready to Test screen is displayed and
subs
equent assays are labeled accordingly until
these settings are changed.
*List opti
on
If the List checkbox
, available in Supervisor Mode, is checked for the applicable
Field Name, when
a field un
der Value is tapped once, a dropdown list is displayed, rather than a keyboard. Select
from the list or <Add New>, as described below.
Your Complete Source for
Testing Equipment
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
Info@BergEng.com