Bruker S1 TITAN User Manual

S1 TI
TAN, T
RACER
5, and CTX
User Manual
030.0112.04.0
44 of 67
Custo
m
settings
To custo
mize
spectrome
ter settings
–
Step
Act
ion
Result
1
From th
e
Sp
ectrometer Settings
screen,
tap the fi
eld next to kV (kilovolts) or
μA
(microa
mp)
.
The num
eric keyboard is
disp
layed.
2
Tap a v
alue and tap
OK.
The keyb
oard is removed and the field
reflects the change.
3
Repeat steps 1 and 2 for the other field.
Reset
To res
tore values
, tap Reset. Origin
al values are displayed.
Addi
tional
T
RACER
5
settings
The T
RACER
5 has th
e described
setting options plus the foll
owing
. These
settings are required to
tell the instr
ument which hardware options are installed so the data is recorded in measurement
files.
Option
Lists op
tions for…
Manual
Filters that
can be manually installed.
Collimato
r
Collimato
r
s that can be
manually installed.
(If a c
ollimator is installed but
another i
s selected here, the installed collimator number in the status bar is
displayed in red instead of black.)
Atmosph
ere
Atmospheric
measurement environments
:
Air – nor
mal use.
Vacuum – setting for use with a vacuum pump to eliminate air between the
sample and detector.
Flush – setting for use with a Helium flush to replace air between the sample
and detector.
Your Complete Source for
Testing Equipment
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
Info@BergEng.com

Bruker S1 TITAN Specifications

General

Brand	Bruker
Model	S1 TITAN
Category	Measuring Instruments
Language	English