4. Tack or staple all of the left side on 2” centers keeping the cloth even along the wood frame. Tack or staple the
balance of the head end on 2” centers also keeping the cloth even along the wood frame. Stretch the cloth tightly
toward the foot end of the table, tacking or stapling on 2” centers along the wood frame at the foot end. Stretch
the cloth tightly across the table to the right side, tacking or stapling on 2” centers all the way along the wood
frame at the right side.
Item Description Qty.
1 Bed Cloth 1
5. Stretch the cloth into the corner pocket openings and tack or staple to the wood slate frame. Trim off excess cloth
around the perimeter of the slate. Locate the eighteen (18) rail attach holes and cut clearance holes in the cloth
with a sharp knife.
Item Description Qty.
1 Bed Cloth 1
NOTE: Occasionally stretch cloth, leaving wrinkles at
the pockets. To tighten, remove apron, one end rail
assembly and one side rail. Pull cloth taut, and re tack or
re-staple along the open end and side to restore
original tightness.
Page 14 of 24
To Next Page
Loading...
