REMOTE CONTROL FUNCTIONS -
COMBINATION KEYS
X-FAN
This function indicates moisture levels will blow away after unit stops to prevent mold.
1.When X-FAN function is on: Press ON/OFF button (on remote) to turn off the unit.
The indoor fan will run for approximately 2 minutes at low speed. Press X FAN button
to stop indoor fan.
2. When X-FAN function is off: Press ON/OFF button (on remote) to turn off complete unit.
Auto Run
The Auto Run mode automatically adjusts to the room's temperature. The LCD on the
unit does not show the temperature.
Lock
Press "+" and "-" buttons simultaneously to lock or unlock the remote control. If remote
control is locked, the icon will display; when this occurs press any button on the
remote three times. The lock will disappear. If the remote is not locked, the lock
will not appear.
Fahrenheit & Centigrade
Make sure the remote control is off. Press MODE and press "C" or "F" to switch between
fahrenheit and centigrade.
To Next Page
Loading...
Need help?
General
