Checking installation
Testing unit operation
Items to be checked Possible problem
The unit may drop, shake or emit noise.
Has the refrigerant leakage been
tested?
(heating) capacity.
It may cause condensation and water
dripping.
Is water drained well?
It may cause condensation and water
dripping.
Is the voltage of power supply accord-
ing to the voltage marked on the
nameplate?
It may cause malfunction or damaging
the parts.
Is electric wiring and pipeline installed
correctly?
It may cause malfunction or damaging
the parts.
Is the unit grounded securely? It may cause electric leakage.
It may cause malfunction or damaging
the parts.
Is there any obstruction in the air inlet
and outlet?
(heating) capacity.
The dust and sundries caused during
installation are removed?
It may cause malfunction or damaging
the parts.
The gas valve and liquid valve of
connection pipe are open completely?
(heating) capacity.
1. Preparation of test operation
2. Method of test operation
operation.
whether the operation is normal or not.
60.8°F (16°C), the air conditioner can’t
start cooling.
To Next Page
Loading...
Need help?
General
