Bryant A180218B User Manual

ventil
Installation Instructions
NOTE: Read the entire instruction manual before starting the
installation.
NOTE: Please refer to the literature provided with the connected HVAC
equipment for more details on system operations with specific pieces of
equipment.
The features and functions outlined in the Installation Instructions reflect
Version 1.3 or later software. See the Evolution Connex product page on
the HVACPartners.com website or the Downloads section of the
www.MyEvolutionconnex.Bryant.com website for the latest software
release and literature.
US Patents: Carrier U.S. Pat No. 7,243,004, U.S. Pat No. 7,775,452,
pointSET™ U.S. Pat No. 7,415,102
SYSTXBBECC01-C,
SYSTXBBWEC01-B,
SYSTXBBECF01-B,
SYSTXBBWEF01-B
Evolution™ Connex™
Control
A210173
A180277
A180218B

Bryant A180218B Specifications

General

Brand	Bryant
Model	A180218B
Category	Thermostat
Language	English

Summary

Safety Considerations

Installation Procedures

Location Guidelines

Recommendations for optimal placement of the wall control and sensors for accurate readings.

Wiring Considerations

Essential guidelines for wiring the system, including ABCD bus and shielded wire usage.

Commissioning the System

Indoor and Outdoor Unit Search

Process for the control to identify connected indoor and outdoor system components.

Airflow and Duct Assessment

Verification of system airflow and measurement of ductwork for zoned systems.

Service Menu Operations

System Configuration Settings

Access to detailed setup options for thermostat, fan coil, furnace, and heat pump.

Thermostat Setup

Furnace Setup Options

AC/Heat Pump Setup Options

Zoning System Configuration

Equipment Check Out Procedures

Procedures to exercise and verify the operation of electric heat, furnace, AC, and heat pump.

Service Information and Diagnostics

Refrigerant Charging Procedures

Detailed steps for proper refrigerant charging, pump down, and evacuation of the system.

Wireless Network Setup

Wi-Fi Connection Configuration

Wiring Diagrams