11
Miscellaneous>Evolution Connex Control Dealer Logo Application -
Instructions.
4. Installation
4.1. Overview
This instruction covers installation of the Evolution Connex Control
only. Physical installation instructions for the indoor and outdoor
equipment, and accessories are provided with each unit.
Setup, commissioning, operation, and troubleshooting of the Evolution
System are covered in this installation instruction at a high level. More
detailed information may be available in the Evolution System HVAC
equipment Installation Instructions. This is the guide to connecting the
system components and commissioning the system once all physical
components are installed. Special screen prompts and start-up
capabilities are provided in the Evolution System to simplify and
automate the initial commissioning of the system.
• Install the Evolution Connex Control according to this instruction.
• Install indoor unit, outdoor unit, and accessories according to their
instructions.
• Wire complete system according to this instruction.
• Setup, commission, and operate system according to this instruction,
and as supplemented in the HVAC equipment Installation Instructions,
to assure a smooth and trouble free start-up.
• Note that some detailed equipment configuration and service
information may be included with the equipment instructions. Please
refer to the equipment installation instruction manuals, and applicable
technical training materials, for all devices for complete information.
To Next Page
Loading...
Need help?
General
