20
OPERATING THE THERMOSTAT
Using the fan
When the fan is on, it helps distribute air throughout your home for a more even
temperature in all spaces. You can set the thermostat so that the fan runs only
during your heating and cooling cycles (auto mode) or to run continuously.
The thermostat is set at the factory to run the fan automatically as needed (“auto
fan”). Here’s how to change the setting so it runs continuously.
1. Open the door.
2. Press the fan button on the left. The display message
will change from auto fan to fan on.
3. To return the fan to auto mode, press the fan button
again. You will see fan auto on the display.
4. Close the door.
To Next Page
Loading...
Need help?
General
