28
ADVANCED OPTIONS
Clearing the reset reminders
The thermostat tells you when it’s time to change or service the UV light in the
evaporator coil box connected to the furnace (if equipped), humidifier pad (if
equipped), and furnace filter. (See page 35 for more information.) When the
reminder icons are displayed on the screen, p ressing and holding the done button
for about three seconds clears all reminders on the screen. This might not be the
best option when you have multiple reminders but have done only one of the tasks.
This option lets you reset the reminders individually..
1. Open the door.
2. Press and hold the features button for about three
seconds. The screen will display 01 and the three reset
reminders, as enabled by your installer. One of the re-
minders will flash; the display will show the percentage
of time u sed by that reminder item.
3. Press the features button to select the reminder you
want to clear.
To Next Page
Loading...
Need help?
General
