22
PROGRAMMING THE THERMOSTAT
5. Set the cooling temperature for that time period by press-
ing the button under the cool set at: temperature on
the right and then pressing the up or down button until
you reach the desired cooling temperature.
6. Repeat this process for each of the three remaining time
periods for Monday – day, evening and sleep – by first
pressing the button under the four time periods to se-
lect the time period with the arrow. To change the start
at time, press the button under the time,thenpressthe
up or down button, stopping on the desired time. To set
the heating temperature, press the button under heat
set at:, then press the up and down button, stopping on
the d esired temperature. To set the cooling temperature,
press the button under cool set at:, then press the up
or down button, stopping on the desired temperature.
7. Press the done button on the right when you’ve com -
pleted the process.
8. Close the door.
To Next Page
Loading...
Need help?
General
