48
SPECIAL FEATURES
Auto changeover
The thermostat displays one of five modes: heat,cool,Emheat(heat pump
version o nly), heat cool (auto mode) and off. When the mode selection is for both
heating and cooling – auto mode – the thermostat is in auto changeover mode. This
allows the system to switch from heating to cooling – or from cooling to heating –
to maintain the temperatures you’ve programmed. It does this automatically.
Smart Recovery
The Smart Recovery feature transitions your home from one temperature period
(wake, day, evening, sleep) to the next so that the your home’s temperature matches
the temperature setting at the start of each time period. This means, for example,
that if your sleep period temperature setting is lower than the period that precedes it,
the thermostat will start cooling down the home before the beginning of the
scheduled sleep period. It does this at an energy --efficient rate. This not only helps
make your home as comfortable as possible, it also makes your thermostat more
cost effective. Call your dealer to adjust Smart Recovery settings.
To Next Page
Loading...
Need help?
General
