26
PROGRAMMING THE THERMOSTAT
Programming a vacation schedule
You can program a special heating and cooling schedule to follow when you will be
goneforavacationoranextendedperiodoftime.
1. Open the door.
2. Press the set button on the left side repeatedly until the
screen shows vacation settings on the right side, your
vacation heating and cooling temperatures in the lower
right, and humidify* on the bottom.
3. The selection box is around the heating temperature.
Press the up or down button to select your desired heat -
ing temperature.
4. To adjust your cooling temperature, press the button
under the cool set at temperature on the screen. The
selection box will move to that number.
5. Press the up or down button to select your desired cool-
ing temperature.
6. To change the humidity setting, press the button under
humidify. The current setting will appear in the center of
the screen.
*
Only homeowners with th e T6--PRH model o f thermostat will see a ”humidify” icon.
To Next Page
Loading...
Need help?
General
