Charging
If the bluetooth indicator light keeps flashing while you are working, the battery power is low and the device needs to b
e recharged.
Step 1: Connect the Micro USB power cable to the keyboard charging connector;.
Step 2: Connect the USB cable to the computer’s USB interface or USB power adapter.
Step 3: The Charge red indicator light will stay on when the device is charging. Once charged full, the green indicator li
ght will turn off. Charging time is 3-4 hours.
Troubleshooting
(A) Unable to connect
1. Make sure the power switch is turned on
2. Make sure the keyboard or the speaker is within the operating distance
3. Make sure the battery is charged
4. Make sure iPad Bluetooth setting is at on status
5. Make sure bluetooth keyboard or speaker is connected to iPad
6. Make sure the bluetooth keyboard has been paired with the iPad
(B) Unable to charge
Make sure the USB power cable is connected properly to the keyboard and the power source
To Next Page
Loading...
