Bryston ST Series - Typical Surround Sound Hookup

Typical Surround Sound Hookup:
Shown below: is a typical hookup between a
surround sound processor and the 9BST. We
show balanced interconnects which we rec¬
ommend especially when the 9B is located
more than 10 feet from the processor. The
connections would be similar using the unbal¬
anced interconnects. This suggested layout
when viewed from the front of the 9B has the
center channel in the middle and left and right
front channels adjacent to the center with left
UNBALANCED OUTPUTS
RIGHT CENTER LEFT LSURR SUB
@ (§)(§) @ @
RSURR
REMOTE 12V
OUTPUT
RIGHT
BALANCED OUTPUTS
CENTER LER
LSURR SUB
and right surround speakers juxtaposed to
the appropriate left and right front channels.
This particular setup allows you to easily
monitor the status of each individual channel
as the power LED’s will correlate with the
positions of the speakers in most rooms (see
diagram below). It should be noted that be¬
cause each channel on the 9B is identical
any channel can be operated with any input
and arranged as required.