Bryston ST Series - Bryston 20-Year Warranty and Specifications; Warranty Details; 9 B-120-R and 9 B-120-P Specifications; THX Model Information and Dimensions

Bryston products are warranted to be free
from manufacturing defects for a minimum
of twenty years from the original date of
manufacture. This includes parts, labour
and return shipping to the first owner and
all subsequent owners. Warranty coverage
is automatic and commences with the
original date of manufacture which is kept
on file at Bryston.
In the event of a defect or malfunction,
Bryston will remedy the problem by repair
or replacement, as we deem necessary, to
restore the product to full performance.
This warranty is considered void if the
defect, malfunction or failure of the
product or any component part was
caused by damage ( not resulting from
a defect or malfunction ) or abuse while
in the possession of the customer.
Tampering by persons other than factory
authorized service personnel, or failure
to fully comply with Bryston operating
instructions, voids the warranty.
This warranty gives you specific legal
rights and you may also have other
rights which may vary from province to
province and country to country.
FOR BRYSTON SERVICE OUTSIDE CANADA:
CONTACT YOUR LOCAL DISTRIBUTOR
OR CHECK OUR WEB SITE AT:
www.bryston.ca
OR CALL BRYSTON DIRECTLY AT:
PHONE: 705-742-5325
FAX: 705-742-0882
BRYSTON SERVICE CANADA:
24 STEINWAY BLVD,. UNIT 48
ETOBICOKE, ONTARIO
CANADA M9W 6T8
PHONE: 416-675-2585
FAX: 416-675-3103
BRYSTON LTD.
P.O. BOX 2170,677 NEAL DRIVE
PETERBOROUGH, ONTARIO
CANADA K9J 7Y4
PHONE: 705-742-5325
FAX: 705-742-0882
BRYSTON SERVICE U.S.A.:
30 COVENTRY ST.
NEWPORT VERMONT.
U.S.A. 05855
PHONE: 802-334-1201
FAX: 802-334-6658
Specifications: 9B-120-R channel
power rating:
120 Watts into 8 Q
200 Watts Into 4 Q
input impedance: I
balanced
15kO
unbalanced 50 kQ
sensitivity:
bal input reg
2 Volt in = 100 Watts/8Q
bal input +6
1 Volt In = 100 Watts/8 Q
unbal
1 volt in = 100 Watts / 8 Q
distortion:
Thd + N
.007% 20Hz to 20kHz at 120 Watts / 8 0
IMD
.002% 60 Hz + 7kHz mixed 4 to 1
noise
-107db 20Hz to 22kHz bandpass
power consumption:
all channels at full power with 8 ohm loads = 900 VA.
all channels at full power with 4 ohm loads = 1600VA.
all channels idle = 100 VA.
9B-120-P channel
The 9B-PRO version provides for input attenua¬
tion of up to 14dB by adjusting the ‘LEVEL’
control. Full attenuation versions are also avail¬
able. Level controls are not available on THX
versions.
THX
THX MODELS ARE MANUFACTURED UNDER
LICENSE FROM LUCASFILM LTD. THX IS A
TRADEMARK OF LUCASFILM LTD.
dimensions
rack mount models 19” x 17" x 5.25”
17" models 17” x 17” x 5.25"
shipping weight 75 lbs