Manual EVoBASIC v.7 62 / 80
4.1.3- Main menu
Press the "OK" button from the main screen to access the main menu.
Using the buttons you can select a line of the menu, indicated by
the arrow (). The OK button is used to confirm the selection.
To access the configuration menu, you need to confirm the operation by
selecting (S) through the arrow, and pressing OK.
4.1.4- Configuration
In the configuration menu you can select the configuration parameters,
which usually only have to be adjusted when installing the equipment.
ATTENTION: A password will be required when trying
to change some options of this menu, to avoid an involuntary
change of some parameter that could affect to the right
behavior of the unit.
To Next Page
Loading...