Manual EVoBASIC v.7 63 / 80
4.1.4.1- Change of language
From the configuration menu select "Language", press the OK button,
and once the required language has been selected, press the OK button
and EXIT.
4.1.4.2- Control
The equipment allows you to select from 4 different modes of control:
Manual: The equipment produces chlorine continuously, depending
on the % of production selected. If you have a fitted ADVANCED probe
Kit probe, it will ignore its value and chlorination will not stop even
though the set value has been exceeded. When selecting this mode, the
equipment will ask if you want to display the value of the Redox probe
(ORP) on the main screen.
Select this mode if you do not have an ADVANCED (Redox) probe Kit, by
adjusting production and hours of filtering depending on the nature of
your swimming pool, its volume number of bathers and season of the
year.
Automatic
Select this mode only if you have an ADVANCED probe Kit (Redox) or
PRO/2 amperometric kit. If you do not have a probe, the equipment will
act at random and end up by stopping and showing an error.
To Next Page
Loading...