Manual EVoBASIC v.7 66 / 80
If chlorination is carried out with the cover in place,
when it is removed, the pool should not be used straightaway.
It is better to wait ½ hour for any vapours between the water
and cover to dissipate.
Note: Password “1234” is required to modify this
function.
4.1.4.7 Flow switch
The flow sensor detects whether or not there is water flow in the piping.
If it detects that there is no flow, the production will stop, and an alarm
will sound accompanied by a red warning LED. Once the flow has been
reestablished, the equipment will return to normal operation.
The "Flow Kit" (optional) is necessary to activate the flow sensor, which
is done by pressing OK in the menu Flow Switch = Y.
Note: Password “1234” is required to modify this
function.
4.1.4.8 Acid / Alkali
With this option you can select the type of pH corrector to be used in
your swimming pool.
To Next Page
Loading...