Manual EVoBASIC v.7 68 / 80
4.1.4.10 Chloride Alarm
When the unit is configured in automatic mode, it is possible to disable
the “Chloride Alarm”. This alarm will detect if the ORP or PPM reading
hasn’t changed for two hours or more, despite the unit has been in
production.
Despite this alarm is been implemented to detect if a probe is not in
good conditions, or there is some chemical issue in the water, it can be
disabled if the user wants to maintain the production despite everything.
This alarm is disactivated from the factory
Note: Password “1234” is required to modify this
function.
4.1.4.11 Buzzer
When an alarm occurs, the equipment stops its production, and displays
an acoustic and light warning to warn you of the need to resolve the
incident.
However, it is possible to configure the acoustic warning through the
following options:
- No: Acoustic warning always silenced.
- 24h: Acoustic warning activated 24 hours a day.
- Adjustable: Allows you to indicate within which time slot it will remain
activated.
This alarm is disactivated from the factory
4.1.5- Chlorine menu
With this menu you can select all parameters related to chlorine
production.
To Next Page
Loading...