30
19.0 BSS Supported Options
The FDS-360 has unbalanced output as standard. Should output balancing be
required, then the BSS AR204 line balancing unit should be used. This unit
provides four input/output circuits, each isolated by a transformer. It utilises a
custom designed high quality toroidal transformer carefully developed to
accommodate high line level signals down to 15Hz. The maximum load
should not exceed 600 ohms. The size and weight of the transformers does not
permit them to be included as part of the case structure of the FDS-360, so
provision has been made for the AR204 to be either rack mounted or a 1U
front panel (which has the capacity to mount 2 x AR204), or to be individually
mounted inside the racking system of the installation. Connections between
this and the FDS-360 are standard 3 pin XLR leads.
19.1 Output
Balancing
In installations where fully tamper proof security is required, the FDS-360-SC
security cover system can be fitted. This recesses and covers the front panel of
the FDS-360 behind a blank steel panel, such that no access is gained to any
of the front panel controls. Fitting instructions for this are provided with each
kit.
19.2 Security Cover
Supported Options
To Next Page
Loading...