PB2 series products are too heavy, which may make it difficult for one
person to carry them. It is recommended that two or more people carry them,
or install lifting rings, and use lifting equipment to move it.
Tips:
PB2 series products with lifting rings are
shown in the right figure. After the
product is installed, the lifting ring can be
disassembled.
4.4.2 Installation
1. Cut the packing strap, open the carton
and take out the mounting bracket and
accessories.
Verify whether the materials are intact
according to Chapter 2 ‘Packing List’.
2. Fix 4 rubber pads to the product.
(You can choose whether to install
according to your personal needs)
3. Refer to the following figure for the minimum distance between the mounting
To Next Page
Loading...
General