35
eFax 2000 - Edition 4 – 14th November ’00 (3313)
To send a fax to multiple destinations
Load the document.
Select the destinations. This can include
groups
(see page 32) as well as individual
numbers.
To select a group:
Press AUTO DIAL.
Press
#
.
Enter the number of the Group you want.
To select a ONE TOUCH number:
Press the ONE TOUCH button you want.
If the display asks for confirmation, press
the START button.You can then select
another one touch number.
Or
To select an AUTO DIAL number:
Press AUTO DIAL.Enter the 2-digit location
number you want. If the display asks for
confirmation, press the START button. You
can then select another one touch number.
Or
To enter a number from the keypad:
Dial a number as normal.
Press
START. You can now enter another
number, up to a total of 10 fax numbers.
Press
START again.
Display shows
ENTRY IS OK?
DIAL (START) CHECK (–––>)
Press START to begin faxing.
Please note
You can add a another group by pressing
#
within 3 seconds and then next group number
you want.
Please note
If you pause for more than 3 seconds after
entering a number, the display will show MULTI
LOCATION and the numbers set for 5 seconds.
You can continue to enter numbers whilst this is
in the display.
AUTO DIAL
AUTO DIAL
To Next Page
Loading...
Need help?
General
