If you need some help, call us on 0800 145 6789
†
or go to bt.com/pr oducthelp
15
One-touch memory
telephone numbers can be
a maximum of 32 digits.
If you enter more than
32 digits you will hear an
error tone and the number
entered will not be saved.
If you wish to cancel storing
a number, replace the
handset on the base or press
. The storing process
will be cancelled and any
number that was previously
stored will be retained.
You can also store a further
one-touch number under
the 1571 button if you
wish to. If you do, the new
number will replace the
1571 automatic dial out
feature. If you then decide
to delete the number you
store, the memory location
will default back to 1571.
You can store 3 of your most important telephone numbers
under the one-touch memory buttons ,
and . There is a memory card located above the
one-touch memory buttons so you can make a note of
the number or contact associated with the number you
have stored. You’ll need to lift the plastic plate up so
you can write on the card.
Store a one-touch number
1. Lift the handset or press .
2. Press and hold the button for 2 seconds until
a confirmation tone is heard, then release.
3. Press a button to assign a number: M1 ,
M2
or M3 . A confirmation tone will
be heard.
4. Dial the number you want to store
5. Press and release the button. A confirmation
tone will be heard.
6. Replace the handset.
One-touch memory
To Next Page
Loading...
Need help?
General
