If you need some help, call us on 0800 145 6789
†
or go to bt.com/pr oducthelp
17
Quick dial memory
telephone numbers can be
a maximum of 32 digits.
If you enter more than
32 digits you will hear an
error tone and the number
entered will not be saved.
If you wish to cancel storing
a number, replace the
handset on the base or press
. The storing process
will be cancelled and any
number that was previously
stored will be retained.
There is a Quick dial
memory card located under
the handset so you can
make a note of the number
or contact associated with
the number you have
stored. You’ll need to lift the
plastic plate up so you can
write on the card.
You can store 10 of your most frequently dialled
telephone numbers under the quick dial memory
buttons to .
Store a number in the quick dial memory
1. Lift the handset or press .
2. Press and hold the button for 2 seconds until
a confirmation tone is heard, then release.
3. Press a button to assign a number: to .
A confirmation tone will be heard.
4. Dial the number you want to store
5. Press and release the button. A confirmation
tone will be heard.
6. Replace the handset.
Dial a quick dial memory number
1. Lift the handset and wait for the dial tone or
press .
2. Press the button.
3. Press the quick dial memory location button
to under which the number you
want is stored. The number will be dialled
out automatically.
Quick dial memory
To Next Page
Loading...
Need help?
General
