If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Settings 51
The default setting for all call
settings is On.
If Auto answer is set to On you
can answer a call by lifting the
handset off the base. If it’s set
to Off, you’ll need to lift the
handset off the base and then
press .
If Auto end is set to On you
can end a call by placing the
handset back in the base.
If Auto end is set to Off,
you’ll need to press to
end the call.
With Auto join calls set to On
you can automatically join
an existing call from another
registered handset without
being invited to join the call,
you can simply press to join.
With First ring set to Off, an
incoming external call will be
displayed visually before the
handset(s) start to ring for the
second burst of ringing.
Choose from 5 base ringtones.
The default base ringtone is
Melody 1.
Change the call settings
1. Select
Menu
, scroll to
Settings
and press .
2.
Sounds
is displayed, press until
Call
Settings
is
displayed and press .
3.
Auto
Answer
is displayed, press or press
to display either
Auto
End
Call
,
Auto
join
calls
or
First
Ring
and then press .
4. Press or to select
On
or
Off
then press
to save.
Saved
will be displayed and you will hear a
confirmation tone.
Base settings
Set the base ringtone
1. Select
Menu
, scroll to
Settings
and press .
2.
Sounds
is displayed, press until
Base
Settings
is
displayed and press .
3.
Ringing
is displayed, press .
Ringtone
is
displayed, press .
4. The current ringtone will be played at the base.
Press or to hear the different ringtones
and press to save your choice.
Saved
will be
displayed and you will hear a confirmation tone.
To Next Page
Loading...