BT BT6600 - Call Handling Settings

Settings
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
61
The default setting is Auto
answer Off to help with
managing any nuisance calls.
If Auto answer is set to On you
can answer a call by lifting the
handset off the base. If it’s set
to Off, you’ll need to lift the
handset off the base and then
press
.
If Auto end is set to On you
can end a call by placing the
handset back in the base.
If Auto end is set to Off,
you’ll need to press
to
end the call.
With Auto join calls set to
On you can automatically
join an existing call from
another registered handset
without being invited to join
the call, you can simply press
to join.
With First ring set to Off, an
incoming external call will be
displayed visually before the
handset(s) start to ring for the
second burst of ringing.
Change the call settings (Auto answer, Auto end
call, Auto join and First ring)
1. Select Menu, scroll
to display Settings and
press Select.
2. Press
to highlight Call settings and press
Select.
3. Press
or to highlight On or Off for Auto answer
and then press
to highlight On or Off for Auto
end call, follow the same procedure for Auto join
calls and First ring, then select Save.
Base settings
Set the base ringtone melody and volume
Choose from 5 base ringtones. The default is
Melody 1. There are 5 base ringer volume levels
plus Ringer Off. The default is Level 3.
1. Select Menu, scroll
to display Settings and
press Select.
2. Press
to highlight Base settings and
press Select.
3. Ringing is highlighted, press Select.
4. Press
or to highlight the ringtone melody you
want, then press
to select the volume level
you want and select Save to save your choices.