Switch on Guest Wi-Fi
Oer free, secure wi- for your guests – without the need
for a password.
You’ll like Guest Wi-Fi because:
your network is safe and secure
guests won’t need a password
they’ll be happier and stay longer
your private network is prioritised.
Note: Guest Wi-Fi can have up to 13 users at a time.
Performance will vary with your broadband speed.
To nd out more about Guest Wi-Fi, or if you’d like to leave any
feedback, head over to bt.com/business/guestwi
5
How to switch on Guest Wi-Fi
1 Make sure your Hub is set up and connected to the internet
(see page 4).
2 Open a web browser window and type http://btbusinesshub.home
into the address bar to open your Hub Manager.
3 Click on the Public Wi-Fi tile (beneath Wireless).
4 Enter your Admin password (it’s on the card on the back of your
Hub – it’s not the same as your Wireless password).
5 Toggle Guest Wi-Fi on and conrm you want to make the change.
6 Once it’s ready BT_Guest_Wi-Fi will be shown as ‘Active’, but
sometimes it will appear in your devices’ available wi- networks
before the Hub Manager shows it is ready. It usually takes a few
minutes but can take up to 24 hours to turn on.
Howtogetastrongwi-signal
To make the most of your wi-, follow the tips at
bt.com/business/yourwi-
8
Other settings you can change using Hub Manager
Apart from switching on Guest Wi-Fi, you can also change
your username and password, Admin password, wi- settings
and test your broadband. You can log in to your Hub Manager
using steps 1–2 above.
All done.
6
4005 BTB Smart Hub User Guide-FTTP v4 [3].indd 6 26/01/2018 16:09
To Next Page
Loading...
