BT Diverse 7110 Plus - Setting Handset Ringer Melody; Adjusting Handset Ringer Volume; Activating Quiet Mode; Configuring Handset Beeps

23
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
You can set different ringtones for
external calls and internal calls.
Choose from 10 polyphonic and 5
standard handset ringtones. Melody
1-5 are standard and Melody 6 to 15
are polyphonic.
Important
Changing the handset ringer melody
will only change the ringer melody
you hear when callers stored under
No Group in your phonebook or
callers whose numbers are not stored
in your phonebook call you. To
change the ringer melody for callers
stored under different call groups, see
page 21 or for more information on
call groups, see the notes on page 18.
Sounds
The following sounds settings are for the handset, see page 25
to change the base ringer volume and melody.
Handset ringer melody (for external or internal calls)
1. Press Menu, scroll to Sound and press OK.
2
. Ringer is highlighted. Press OK.
3
. External is highlighted, either press OK to select or scroll
to Internal and then press OK.
4
. Press or to select the melody you want and
press
OK.
Handset ringer volume (including ringer off)
1. Press Menu, scroll to Sound and press OK.
2
. Ringer is highlighted, press OK.
3
. Scroll to Ringer Volume and press OK.
4
. Scroll or to select the volume level 1-5 or off
and press
OK.
Set to quiet mode
1. Press Menu, scroll to Sound and press OK.
2
. Ringer is highlighted, press OK.
3
. Scroll to Quiet mode and press OK.
4
. Press or to select Beep or Off and press OK.
Handset beeps
1. Press Menu, scroll to Sound and press OK.
2
. Scroll to Tones. Press OK.
3
. Key Tone is highlighted, press OK or scroll to
either
Confirm Tone, Battery Low or Out Of Range
and then press
OK.
4
. Press or to select On or Off, then press OK
to confirm.
5
. Press Back to return to the previous menu level.
The handset has 5 ringer volume
settings plus Off.
The
icon will be displayed in
the idle screen when the ringer is
set to
Off.
As a quick way to switch the handset
ringer off, press and hold
.
If you switch the handset ringer off
you can still hear a tone when you
receive an incoming call by changing
the
Quiet mode setting to Beep.
Your handset can give a key beep to
each button press. It can also give a
tone to confirm a successful action
such as storing a new phonebook
entry. You can switch these tones on
or off individually.