26
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Handset ringing priority
1. Press Menu, scroll
to Settings and press OK.
2
. Scroll
to BS Settings. Press OK.
3
. Scroll
to Ring Priority. Press OK.
4
. All Handsets is highlighted. Press OK for all handsets to
ring together.
Or
Scroll
to Select Handset. Press OK then press
or
to select the handset you want to ring first. Press OK.
The ring delay option is highlighted. Press
or to set
the number of rings before the other handsets ring. Press OK.
5
. Press Back to return to the previous menu.
Recall mode
1. Press Menu, scroll
to Settings and press OK.
2
. Scroll
to BS Settings. Press OK.
3
. Scroll
to Recall Mode. Press OK.
4. Press
or to select Timed Break or Earth and
press
OK.
Repeater mode
1. Press
Menu
, scroll
to
Settings
and press
OK
.
2
. Scroll
to
BS
Settings
. Press
OK
.
3
. Scroll
to
Repeater
Mode
. Press
OK
.
4
.
Off
is highlighted. Scroll
to
On
and press
OK
.
5
. Press
to return to the idle screen.
System PIN
1. Press Menu, scroll
to Settings and press OK.
2
. Scroll
to BS Settings. Press OK.
3
. Scroll
to System PIN. Press OK.
4
. Enter the old PIN (default setting 0000) and press OK.
5
. Enter the new PIN and press OK. Re-enter the new PIN and
press
OK. Press Back to return to the previous menu level.
When you have more than one
handset registered to your base, you
can set one handset to ring before the
others. This allows one handset user
to answer all incoming calls first, like
a receptionist.
Choose
All Handsets if you want
all handsets to ring at the same time
or
Select Handset to nominate a
handset to ring before the others.
Ring delay options; 2, 4, 6 or 8 rings.
Earth and Timed Break are settings
for switchboard use. If in doubt
please contact your switchboard
service provider.
You can use a Repeater to boost the
range and reception of your base. A
Repeater must be registered with the
base and the Repeater function must
be set to
ON.
The System PIN is used when
changing certain settings and
registration / de-registration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If you make a mistake, press
Clear
to delete digits.
To Next Page
Loading...
