27
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
If an extension number of six digits
or less, or a local number without
the dialling code is entered in the
phonebook then an access code
and Pause will prefix the number
when dialled out.
PBX access code
If you are connected to a switchboard you may need to enter an
access code (e.g. 9) before each number is dialled. Your BT Diverse
7110 Plus can store an access code which is automatically dialled
before each number.
Set the PBX access code
1. Press
Menu
, scroll
to
Settings
and press
OK
.
2
. Scroll
to
BS
Settings
. Press
OK
.
3
. Scroll
to
PBX
Access
Code
. Press
OK
.
4
. The contents will be blank, enter the number you want (single
digit only) and press
OK
.
5
. Press
to return to the idle screen.
Reset base
This resets your BT Diverse 7110 Plus to its original settings.
1
. Press Menu, scroll
to Settings and press OK.
2
. Scroll
to BS Settings. Press OK.
3
. Scroll
to Reset Base. Press OK.
4
. Enter the system PIN (default setting = 0000) and press OK.
5
. Display shows Reset to Default? Press OK to confirm
or
Back to cancel.
6
. Press Back to return to the previous menu level.
Date/Time/Alarm
Set date and time
Providing you have subscribed to your network’s Caller Display
service, the date and time is set automatically when you receive
your first call.
1
. Press Menu, scroll
to Settings and press OK.
2
. Date & Time is highlighted. Press OK.
3
. Time Format is highlighted, press OK. Press
or to
choose 24 Hour or 12 Hour and press OK.
To Next Page
Loading...
