Date, time and alarm
Date and time
If you subscribe to a Caller Display service from your
network provider the time will be set when you receive
your first call.
If you need to manually set the date and time, please
refer to page 9 for instructions.
Alarm
You can use your BT Mango as an alarm clock.
Set/cancel an alarm
1. Press or until
Date & Time Settings
is displayed
then select the
OK option.
2. Press or until
Alarm Setting
is displayed.
Select the
On option to set an alarm. The first digit is
highlighted.
Or, select the
Off option to cancel the alarm. Then go to
point 6.
3. Enter the time you want the alarm to sound in 24-hour
format, using 2 digits for the hour and 2 for the minutes,
eg. for 07:30am, press
0, 7, 3, 0 then select the OK option.
37
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
To Next Page
Loading...
Need help?
General
