BT MANGO - Send a text message

Send a text message
1. Press or , until TXT Menu is displayed. Select the
OK option.
2.
If you have set up personal user areas, press or to
highlight the user area you want and press
OK. Enter
your sub-address PIN code and press
OK.
If you have not set up any user areas continue to point 3.
3. Write Message is displayed. Select the OK option.
4. Use the keypad to write your message then select
Opt.
5. You can now use or to scroll and choose from
the following options:
Send to – Select OK.
Either enter the number you want to send to using the
keypad and select
OK.
OR, select to open the directory and scroll or
to search for the name you want and select
OK.
OR, select to open the Calls list and scroll or
to search for the name/number you want and select
OK.
Select
OK again to confirm and view the sending mode
options:
Press or to select
Text or Fax and select OK.
58 Text messaging
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
At any time, press Back to go back
to the previous screen, or press
and hold END to cancel and return
to standby.
For quick access to the SMS menu,
press
OK from standby mode.
For more information on personal
user boxes (sub-addresses), see
page 68.
Select the
Clear option to delete
incorrect characters.
Use or to move the cursor
through the text, if you want to
insert/delete text.
For help with entering text, see
page 60.
In the middle of the display, above
the middle option button the
number of remaining characters is
displayed.