BT MANGO - How Callers Send a Text to a User Area

3. Press or until User Boxes Parameters is
displayed. Select the
OK option.
4. Press or to highlight the User Box (1 – 4) you
want and select the
Edit option.
5. The current name for the selected user box is displayed,
select
OK. Name is highlighted, select OK. Enter the
name you want, e.g. Kate, and select
OK.
6. Scroll
DOWN to highlight Password and select OK.
7. Enter a 4-digit password and select
OK. Re-enter the
password to confirm and select
OK.
8. From the Box Setup screen use the navigator button
to scroll down and select
Sub address. Press OK.
9. Enter a sub address number, which is not already in use
and press
OK. To complete the set up press Save.
10. Press
and hold to exit and return to standby.
How callers send a text to a user area
When your caller sends a text, by simply adding your 1-
digit sub-address number on the end of your telephone
number, the text will automatically be stored in your
personal user area.
69Text messaging
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
If you set-up personal user boxes
you must tell people your user area
number. They must put the
relevant user area number at the
end of your telephone number
when they send you a text
message. If they do not include the
user area number, the messages
will be stored in the Common box
and will be accessible to all users of
your BT Mango.
If you later
Edit the user box
name, password or sub address,
after making the changes you must
also select Save from the Box
Setup screen to activate the
new settings.